Encouraging Invasive Acacia Control Strategies by Repurposing Their Wood Biomass Waste for Pulp and Paper Production
Duarte Miranda Neiva, Maria C. Godinho, Rogério Manuel Santos Simões, Jorge Gominho
7 mai 2024 · Forests
Summary
No reviewed summary yet. Read the abstract below or open the original publication.
Abstract
Concerns on the expanding infestation of several Acacia species in the southern Mediterranean European countries have triggered an ever-growing requirement for costly targeted control actions. Valorizing biomass waste produced could help promote and better finance these actions. For that purpose, wood wastes from invasive control actions were tested regarding their pulp and paper potential, aiming to entice cellulose industries to partake in future conservation actions. Wood waste from the five most pervasive Acacia species was studied (Acacia dealbata Link, Acacia longifolia Willd, Acacia mearnsii De Wild, Acacia melanoxylon R.Br, and Acacia saligna Labill) regarding physical and chemical characteristics, and a central composite design was used to optimize alkali charge and reaction temperature on pulping yield and delignification. Bleached kraft pulps were produced with each species’ optimized conditions and for an equitable mixture of all species. Optimized pulp yields (52.6%–53.5%) and pulp polymerization degree (2867–3690) of Acacia species were higher than those of Eucalyptus globulus Labill (used as reference). Optimized bleached pulps were refined and fiber, pulp, and handsheet properties determined. Acacia dealbata and A. longifolia presented high specific wood consumption and lower handsheet strength properties, pointing to overall lower pulping potential, while A. melanoxylon and A. mearnsii characteristics were equal to or higher than those of E. globulus. A. saligna pulp and handsheet characteristics appear more suited for tissue paper. The Acacia mixture achieved acceptable characteristics, enabling the indiscriminate use of Acacia wood regardless of the species. As a shortcoming, the Acacia pulps showed the worst optical characteristics, with brightness dropping substantially with beating (64%–76%) when compared to E. globulus (81%).
Abstract as supplied by the source. Full text may be restricted by the publisher.
Related publications
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 sept. 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k et al. · Central European Forestry Journal
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 mai 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro et al. · European Journal of Wood and Wood Products
Wood Waste Valuation of Selected Timber Species in Iloabuchi Sawmill, Port Harcourt, Rivers State, Nigeria
29 juil. 2025 · I. Amadi, Sunday Ayobami Ogunbode, L. B. Nnyam · Journal of applied science and environmental management
Energy characterization of sawwood generated from mechanical processing of wood in small-scale sawmills
22 sept. 2026 · Irlan Paulo Ferreira Campelo, Renato Nogueira Antas, Elaine Cristina Alves da Silva et al. · Journal of the Indian Academy of Wood Science