Estimation of wood biomass boiler use in cold climate regions on CO2 emissions of light-frame timber structure

Summary

No reviewed summary yet. Read the abstract below or open the original publication.

Abstract

Considering Nagano City, as the cold climate region of Japan, the annual heating load was simulated using a model of a two-story timber structure. The results of simulations were used to compare the CO2 emissions according to the energy consumption of five methods of heating as well as primary and secondary energy sources. Actual data from power and gas companies in Nagano and Japanese energy standards were used for the estimations of CO2 emissions of electric heat pump air conditioners, LNG-powered city gas boilers, LPG boilers, kerosene stoves, and wood biomass boilers using pellets as an energy source. Wood biomass boilers showed CO2 emission savings of up to 85 %, 75 %, 75 %, and 76 %, respectively. The operating and equipment costs were estimated based on secondary energy calculations. The kerosene stove had the lowest cost, but CO2 emissions were lowest in the case of using pellet boilers for 30 years. These results clearly show the potential and merit of pellets used in wood biomass boilers as a renewable energy source when compared to fossil fuels. In addition to the CO2 reduction capabilities, the low operating costs of wood biomass heating systems incentivize their use in cold climates.

Abstract as supplied by the source. Full text may be restricted by the publisher.