Mineralisation of CO2 in wood biomass ash for cement substitution in construction products
Nimisha Tripathi, Colin D. Hills, Raj Shekhar Singh, Stephen K. Kyeremeh, Andrew Paul Hurt
21 janvier 2024 · Frontiers in Sustainability
Summary
No reviewed summary yet. Read the abstract below or open the original publication.
Abstract
This study extends our exploration of the potential of biomass ashes for their CO 2 -reactivity and self-cementing properties. The ability of three hardwood-based biomass ashes to mineralise CO 2 gas and partially replace CEM I in mortars was investigated. The three hardwoods were English oak ( Quercus rober ), English lime ( Tilia x europaea ), and beech ( Fagus sylvatica ). The woody biomass wastes were incinerated at 800°C to extract their key mineral phases, which are known to be reactive to CO 2 gas to form carbonates. The selected biomass ashes were analysed for their CO 2 -reactivity, which was in the range of 32–43% (w/w). The ashes were used to replace CEM I at 7 and 15% w/w and this “binder” was mixed with sand and water to produce cylindrical monolithic samples. These monoliths were then carbonated and sealed cured over 28 days. The compressive strength, density and microstructure of the carbonate-hardened monoliths were examined. The ash-containing monoliths displayed mature strengths comparable to the cement-only reference samples. The CO 2 uptake of oak containing monoliths was 7.37 and 8.29% w/w, for 7 and 15% ash substitutions, respectively. For beech and English lime they were 4.96 and 6.22% w/w and 6.43 and 7.15% w/w, respectively. The 28 day unconfined compressive strengths for the oak and beech ashes were within the range of ~80–94% of the control, whereas lime ash was 107% of the latter. A microstructural examination showed carbonate cemented sand grains together highlighting that biomass ash-derived minerals can be very CO 2 reactive and have potential to be used as a binder to produce carbonated construction materials. The use of biomass to energy ash-derived minerals as a cement replacement may have significant potential benefits, including direct and indirect CO 2 emission savings in addition to the avoidance of landfilling of these combustion residues.
Abstract as supplied by the source. Full text may be restricted by the publisher.
Related publications
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 sept. 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k et al. · Central European Forestry Journal
Evaluation of Wood Processing in the Sawmilling Industry in Ekiti State, Nigeria
1 juil. 2025 · Ademola Ayodeji Omoyeni, Timileyin Samuel Oguntuase · International Journal of Advances in Engineering and Management
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 mai 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro et al. · European Journal of Wood and Wood Products
Moisture-induced timber joining - Utilizing the hygroscopicity and shape-memory effect of wood resulting in dimensional change in a prefabricated wood-only, self-built, sawn timber system for affordable housing in Colombia
1 mars 2024 · Max Salzberger, Juan Sebastian Cruz Rojas, Gilbert Koskamp · Research Square