The visual strength grading of Norway spruce battens processed from recovered wood: mechanical properties and modified grading rules in DIN 4074-1

Summary

No reviewed summary yet. Read the abstract below or open the original publication.

Abstract

Strength grading is essential to ensure standardized and reliable design processes in timber construction. Current visual strength grading (VSG) standards, such as DIN 4074-1, focus on regulating natural features and grading new sawn timber. Sorting criteria for man-made defects resulting from prior use are lacking. This study examines the potential of VSG for battens processed from salvaged rafters for structural applications and proposes modifications to DIN 4074-1:2012 to make it applicable to battens processed from recovered wood. Battens were visually graded based on natural features, and fastener holes were characterized. Bending strength was tested against EN 338 classes, and the impact of fastener holes was assessed. The results indicate that grades S10 and S13 together account for a total yield of 57%. Clusters of fastener holes reduced bending strength in S10 battens, whereas larger holes affected S13 battens. Modification options for DIN 4074-1:2012 were identified, and their effectiveness was validated. As a result, a new sorting criterion, SRC (strength reducing criteria), was introduced to address the interaction between natural features and fastener holes. Battens processed from recovered wood can serve as an alternative to new timber if classified under the proposed grade W10+.

Abstract as supplied by the source. Full text may be restricted by the publisher.