Wood physical and mechanical properties of rambai (Baccaurea motleyana), a tropical fruit tree species
Irvin Dayadi, Muhammad Rosyid Ridho
28 février 2026 · Asian Journal of Forestry
Summary
No reviewed summary yet. Read the abstract below or open the original publication.
Abstract
Dayadi I, Ridho MR. 2026. Wood physical and mechanical properties of rambai (Baccaurea motleyana), a tropical fruit tree species. Asian J For 10: r100103. https://doi.org/10.13057/asianjfor/r100103. This study evaluated the physical and mechanical properties of rambai (Baccaurea motleyana) wood to assess its potential as a timber resource in multipurpose fruit-timber systems. Small clear specimens were prepared from the base, middle, and top section of three mature rambai trees (diameter at breast height 38-44 cm) grown in a private garden, and tested for physical and mechanical properties following the Deutsches Institut für Normung (DIN) standards. The results showed that rambai wood has Green Moisture Content (GMC) of 104.98±9.20%, decreasing significantly from the base toward the top of the stem. Apparent density at ~12% MC averaged 0.62±0.04 g/cm3 and did not differ significantly among axial positions of the stem. Shrinkage behaviour was typical of hardwoods, with tangential and radial shrinkage of about 5.9% and 3.8%, respectively, and a tangential–radial ratio of 1.59±0.28, indicating satisfactory dimensional stability. Mean mechanical properties across the whole stem were 9.52±1.49 GPa for MOE, 85.16±11.28 MPa for MOR, 51.69±5.69 MPa for compression parallel to grain. Impact bending strength and shear strength averaged 7.26±1.65 J/cm2 and 11.81±1.35 MPa, respectively. Overall, these values characterize B. motleyana as a medium grade hardwood with physical and mechanical properties compatible with potential usein furniture, interior joinery and light construction, while further studies on durability, workability and anatomical characteristics are needed to provide stronger support to its promotion as a lesser-known tropical wood resource from fruit-timber systems.
Abstract as supplied by the source. Full text may be restricted by the publisher.
Related publications
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 sept. 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k et al. · Central European Forestry Journal
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 mai 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro et al. · European Journal of Wood and Wood Products
Assessment of Tree Species Availability Based on Sawmilling and Timber Markets Survey in Sinnar State, Sudan
1 juin 2024 · Nasreldin Abdelrahaman Gurashi, Emad H. E. Yasin, Kornél Czimber · Acta silvatica & lignaria Hungarica
Energy characterization of sawwood generated from mechanical processing of wood in small-scale sawmills
22 sept. 2026 · Irlan Paulo Ferreira Campelo, Renato Nogueira Antas, Elaine Cristina Alves da Silva et al. · Journal of the Indian Academy of Wood Science