A Wood Cell Wall-Derived Triboelectric Nanogenerator for Energy Harvesting and Multifunctional Sensing

Streszczenie

Brak zatwierdzonego streszczenia. Przeczytaj abstrakt poniżej lub otwórz oryginalną publikację.

Abstrakt

Using natural biomaterials to construct triboelectric nanogenerators (TENG) has significant implications for the development of sustainable self-powered devices. However, achieving device multifunctionality and miniaturization remains a major challenge. Lignocellulose nanofiber (LCF) offers environmental and sustainability advantages. LCF films prepared from these fibers exhibit excellent mechanical properties, transparency, and biodegradability. Due to cellulose’s strong electron-donating capability, LCF films are considered an ideal material for triboelectric nanogenerator (TENG) devices. LCF-TENG devices exhibit open-circuit voltage, short-circuit current, and power density as high as 25.1 V, 1.6 μA, and 8 μW/cm 2, respectively. Based on the good modifiability and ductility of LCF, the in situ composite ZIF-8 on its surface can further improve its triboelectric behavior, which can be up to 62.1 V, 3.5 μA, and 44 μW/cm 2, which is sufficient to power small electronic devices. In addition, LCF-TENG can also be used as a wearable self-powered sensor for gait analysis, demonstrating stable and sustainable performance in distinguishing different body movements (such as walking, running, and leg lifting). This work proposes a novel TENG based on lignocellulose, which can be used for in-depth physical motion analysis and provides a new material option for the development of next-generation self-powered transient electronic devices.

Abstrakt w wersji dostarczonej przez źródło. Pełny tekst może być ograniczony przez wydawcę.