Effects of high-temperature kiln drying on tensile and shrinkage properties and chemical composition of boxed-heart timbers from Japanese larch ( Larix kaempferi )
Yoshihiro Hosoo, Kota Igarashi, Yukie Shiohara, Satoru Hagio, Misaki Takeguchi, Takashi Takeda, Takahisa YOSHIDA
21 sierpnia 2026 · International Wood Products Journal
Publikacja nie jest oznaczona jako Open Access. Pełny tekst może wymagać dostępu przez wydawcę.
Streszczenie
Brak zatwierdzonego streszczenia. Przeczytaj abstrakt poniżej lub otwórz oryginalną publikację.
Abstrakt
The high-temperature setting method is a kiln-drying technique that rapidly dries boxed-heart timbers under high-temperature and low-relative-humidity conditions to suppress surface checking. This study examined the effects of this drying method on the properties of Japanese larch ( Larix kaempferi ) boxed-heart timbers. Three groups of timbers were subjected to different drying conditions: high-temperature setting for 18 h (HTS-18), high-temperature setting for 48 h (HTS-48), and air seasoning. After drying, each timber sample was sectioned into corner, periphery, and centre regions. Samples from each region were subjected to tensile tests parallel to the grain, fractography on the specimens from the tensile tests using scanning electron microscopy, shrinkage measurements, and chemical analyses. In all regions, the tensile strength, tangential and radial shrinkages from water-saturated to oven-dried conditions, and contents of holocellulose, α-cellulose, and hemicellulose were highest in the air seasoning timbers, followed by the HTS-18 timbers, and then the HTS-48 timbers. The rates of decrease in tensile strength, tangential and radial shrinkages, and hemicellulose content for the HTS-48 timbers relative to the air seasoning timbers were higher in the centre region than in the other regions. Rough and uneven fracture surfaces of the cell walls were observed in almost all earlywood and latewood tracheids in all air seasoning-timber regions. Smoother cell-wall fracture surfaces, which were likely brittle, were predominantly observed in latewood tracheids in all regions of the HTS-18 and HTS-48 timbers, and in earlywood tracheids in the centre region of the HTS-48 timbers. The total lignin content, comprising acid-insoluble and acid-soluble lignin, was similar for all drying conditions. These findings may be useful for gaining a thorough understanding of the properties of high-temperature setting-dried Japanese larch boxed-heart timbers, potentially improving their usability.
Abstrakt w wersji dostarczonej przez źródło. Pełny tekst może być ograniczony przez wydawcę.
Powiązane publikacje
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 wrz 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k i in. · Central European Forestry Journal
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 maj 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro i in. · European Journal of Wood and Wood Products
Moisture-induced timber joining - Utilizing the hygroscopicity and shape-memory effect of wood resulting in dimensional change in a prefabricated wood-only, self-built, sawn timber system for affordable housing in Colombia
1 mar 2024 · Max Salzberger, Juan Sebastian Cruz Rojas, Gilbert Koskamp · Research Square
Effects of thermal and chemical treatments on colourimetric characteristics of young African mahogany and eucalypts wood for sawn timber production
3 lip 2026 · Joyce de Almeida Pinto, Juarez Benigno Paes, Graziela Baptista Vidaurre i in. · Southern Forests a Journal of Forest Science