Effects of physicochemical characteristics on natural durability of eucalypts woods to wood-decaying fungi
Pedro Nicó de Medeiros Neto, Juarez Benigno Paes, Fabrício Gomes Gonçalves, Yonny Martínez López, Nédia Pereira Correia Mendes Correia, Renato Nogueira Antas
2 stycznia 2024 · Journal of Wood Chemistry and Technology
Publikacja nie jest oznaczona jako Open Access. Pełny tekst może wymagać dostępu przez wydawcę.
Streszczenie
Brak zatwierdzonego streszczenia. Przeczytaj abstrakt poniżej lub otwórz oryginalną publikację.
Abstrakt
This study aimed to relate the biological resistance of seven eucalypt woods to wood-decaying fungi with physicochemical characteristics of wood. Two 12-year-old trees per species were randomly sampled, removing disks at 0 (base), diameter to breast height - DBH, 25, 50, 75, and 100% of the commercial height to determine the wood specific gravity. One basal log of 2.20 m of each wooden species was obtained for chemical analysis and biological tests with brown and white rot fungi (Gleophyllum trabeum, Rhodonia placenta, and Trametes versicolor). For these tests, wood samples were taken in two positions in the radial direction of the trunk in the pith-bark direction (median heartwood and transition region; containing heartwood and sapwood), and the relation between wood natural resistance and physicochemical characteristics was established. Wood specific gravity ranged of 0.51 g cm−3 to 0.73 g cm−3, total lignin of 27.34–32.18%, and holocellulose of 53.39–66.18, not being influenced by pith-bark direction. The extractive and ash contents were affected by the pith-bark direction, in which, in general, the transition region exhibited the highest values contents. The extractive showed a negative relation (−0.67) regarding the loss of mass caused by the fungus Rhodonia placenta. For the holocellulose content, it showed positive relations (0.61; 0.54) to the degradation by Rhodonia placenta and Gleophyllum trabeum, respectively. Independently of the analyzed wood and tested fungus, the median heartwood region was more resistant to wood decay fungi than the transition region.
Abstrakt w wersji dostarczonej przez źródło. Pełny tekst może być ograniczony przez wydawcę.
Powiązane publikacje
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 wrz 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k i in. · Central European Forestry Journal
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 maj 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro i in. · European Journal of Wood and Wood Products
Moisture-induced timber joining - Utilizing the hygroscopicity and shape-memory effect of wood resulting in dimensional change in a prefabricated wood-only, self-built, sawn timber system for affordable housing in Colombia
1 mar 2024 · Max Salzberger, Juan Sebastian Cruz Rojas, Gilbert Koskamp · Research Square
Effects of thermal and chemical treatments on colourimetric characteristics of young African mahogany and eucalypts wood for sawn timber production
3 lip 2026 · Joyce de Almeida Pinto, Juarez Benigno Paes, Graziela Baptista Vidaurre i in. · Southern Forests a Journal of Forest Science