Enhancing the properties of Eucalyptus urophylla wood through low-temperature thermal modification and the synergistic effect of thermal modification and impregnation techniques

Streszczenie

Brak zatwierdzonego streszczenia. Przeczytaj abstrakt poniżej lub otwórz oryginalną publikację.

Abstrakt

Cultivated eucalyptus wood is widely used in industry. However, its application in high-value-added products is restricted by its inherent dimensional instability. This study comprehensively assessed the effects of thermal modification (TM) at 150 °C, paraffin (P) or tung oil (T) impregnation, and their combinations (TM + P, TM + T). The results showed that all single treatments (TM, P, T) improved dimensional stability and reduced moisture absorption, although they were accompanied by noticeable colour changes (ΔE* = 5–23.62). Paraffin impregnation provided greater hygroscopic stability than tung oil impregnation and TM alone. The combined TM + P treatment exhibited the most excellent synergistic effect, reducing hygroscopic swelling by 26%–37% and increasing the modulus of elasticity (MOE) by 19%–22% relative to the T and TM + T groups. The optimal treatment (150/4P) achieved the most remarkable improvements: a 64% reduction in dimensional instability, 61% and 58% decreases in equilibrium and saturated moisture content, respectively, a 23% increase in MOE, and an 18% improvement in the modulus of rupture (MOR). FTIR spectra confirmed the incorporation of paraffin or tung oil in the modified wood. Low-temperature TM alone caused minor chemical changes, whereas impregnation induced significant chemical changes.

Abstrakt w wersji dostarczonej przez źródło. Pełny tekst może być ograniczony przez wydawcę.