Modeling of a Non-Wood Biomass Conversion Process in a Grate-Fired Boiler

Streszczenie

Brak zatwierdzonego streszczenia. Przeczytaj abstrakt poniżej lub otwórz oryginalną publikację.

Abstrakt

This paper builds a one-dimensional transient numerical model of mixed fuel of woody and non-woody biomass to simulate the multistage conversion process of biomass in a moving grate-fired bed, including drying, pyrolysis, gasification, and char combustion. Based on time and space discretization, the model comprehensively considers the conservation of mass, momentum, and energy. It also introduces reaction kinetics and freeboard radiation coupling effects to more accurately describe the bed temperature distribution and reaction process. The analysis focuses on the effects of different non-woody biomass mixing ratios and moisture content. This provides references for optimization of the design of future furnaces and operating parameters and mixed fuel composition. The simulation results show that, for pure woody biomass, the surface temperature reaches approximately 200 °C in the first zone, followed by char reactions with peak temperatures up to 592 °C. The whole conversion process takes about 62% of the grate length. Increasing the pepper mixing ratio leads to lower bed temperatures due to the higher moisture content. The maximum bed temperature in the first zone decreases from 592 °C for pure wood to 551 °C at 30 wt.% pepper, with delayed pyrolysis and a thinner char reaction zone. When the pepper mixing ratio is below 20 wt.%, the combustion process maintains a stable temperature gradient and a continuous reaction front, compared to the mixing ratio of 30% pepper case. This confirms the feasibility of non-woody biomass application to combustion technology. Although a higher pepper mixing ratio leads to a slight temperature decrease, the reaction remains stable along the grate, indicating reliable combustion performance.

Abstrakt w wersji dostarczonej przez źródło. Pełny tekst może być ograniczony przez wydawcę.