Wood characteristics of surface-charred modification of Indonesian popular fast-growing species ( Falcataria moluccana and Neolamarckia cadamba)
Fauzan Fahrussiam, Sarah Augustina, Resa Martha, Kidung Tirtayasa Putra Pangestu, Rizqi Adha Juniardi, Dini Lestari, Dwi Sukma Rini, Andi Tri Lestari
15 kwietnia 2026 · Wood Material Science and Engineering
Publikacja nie jest oznaczona jako Open Access. Pełny tekst może wymagać dostępu przez wydawcę.
Streszczenie
Brak zatwierdzonego streszczenia. Przeczytaj abstrakt poniżej lub otwórz oryginalną publikację.
Abstrakt
Jabon (Neolamarckia cadamba) and sengon (Falcataria moluccana), widely planted in Indonesia's community forests, are fast-growing species used as raw materials in the timber industry. Their low density limits their use in final products. This study aimed to evaluate their quality using eco-friendly surface-charred modification with butane gas torches. Three treatments were applied: (1) charred surface (Ch), (2) charred surface followed by removal of residual charcoal (Ch + B), and (3) un-charred surface (control). Properties were evaluated by measuring charring quality, mechanical properties, dimensional stability, termite resistance, and chemical component alteration. The charring characteristics assessment showed Ch surfaces had higher char thickness and mass loss than Ch + B surfaces for both wood species. The average anti-swelling efficiency of charred wood increased by 21–36% compared to control, indicating improved dimensional stability. The mechanical properties and termite resistance showed no significant changes in charred wood surfaces (Ch and Ch + B) for both species compared to untreated wood. Fourier-Transform Infrared Spectroscopy results demonstrated changes in chemical groups (holocellulose, lignin, carbohydrate) for both species after charring at wavelengths of 800–1800 cm⁻1. These findings suggest surface-charred modification can improve dimensional stability of both wood species. However, further enhancements in mechanical properties and durability are needed.
Abstrakt w wersji dostarczonej przez źródło. Pełny tekst może być ograniczony przez wydawcę.
Powiązane publikacje
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 wrz 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k i in. · Central European Forestry Journal
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 maj 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro i in. · European Journal of Wood and Wood Products
Assessment of Tree Species Availability Based on Sawmilling and Timber Markets Survey in Sinnar State, Sudan
1 cze 2024 · Nasreldin Abdelrahaman Gurashi, Emad H. E. Yasin, Kornél Czimber · Acta silvatica & lignaria Hungarica
Energy characterization of sawwood generated from mechanical processing of wood in small-scale sawmills
22 wrz 2026 · Irlan Paulo Ferreira Campelo, Renato Nogueira Antas, Elaine Cristina Alves da Silva i in. · Journal of the Indian Academy of Wood Science