Beam-on-Foundation modelling of dowel-type single fastener connections in cross laminated timber

Summary

No reviewed summary yet. Read the abstract below or open the original publication.

Abstract

In this study, a numerical model that aimed to predict the strength and stiffness, of a single laterally loaded mechanical fastener in steel-to-cross laminated timber (CLT) connections using a Beam-on-Foundation (BoF) model, is presented. The BoF model was used to predict the ductile failure modes of steel-to-CLT connections and considered the layered structure of CLT. When compared to the European Yield Model (EYM), the BoF model was found to be advantageous as it not only predicted the strength but also the stiffness of the connections. A comparison of the slip modulus and strength from BoF model simulations of experimental tests carried out on steel-to-CLT connections showed good agreement with the experimental results. Using the BoF model, the influence of; (i) density, (ii) deck layer orientation, (iii) embedment behaviour, (iv) dowel diameter, (v) steel plate thickness, and (vi) embedment length, on steel-to-CLT connections was investigated in a parameter study. The results presented herein highlight the benefit of the BoF model that considers CLT layer specific embedment behaviour in determining the shear capacity and stiffness of steel-to-CLT connections.

Abstract as supplied by the source. Full text may be restricted by the publisher.