Wholly bio-based hyperbranched waterborne polyurethane coatings reinforced with surface-engineered cellulose nanofibers for sustainable wood protection
Huachun Qi, Chunfeng Li, Xin Song, Mingli Liu
14 August 2026 · Industrial Crops and Products
Summary
No reviewed summary yet. Read the abstract below or open the original publication.
Abstract
Bio-based waterborne polyurethane (BWPU) coatings have drawn attention as renewable alternatives to petroleum-based wood finishes for Larix gmelinii , yet their mechanical strength, hardness, and barrier properties remain insufficient for demanding applications. In this work, cellulose nanofibers (CNFs) extracted from Pennisetum flaccidum were first modified through acetylation, sulfonation, and silanization, and then covalently incorporated into a hyperbranched castor oil-based BWPU as macromolecular cross-linkers and chain extenders. The functional groups grafted onto the CNF surfaces governed the cross-linking density, hydrogen-bond strength, and degree of microphase separation within the cured films, thereby establishing a direct relationship between surface chemistry and coating performance. Among the three modified variants, silanized CNFs (Si-CNFs) constructed a hydrophobic association network that raised the storage modulus from 1315 to 2873 MPa, increased T 10% to 310 °C, and reduced the fractional free volume from 54.5% to 20.2%. The resulting Si-CNF coating achieved a tensile strength of 33.5 MPa and a pendulum hardness of 0.819, and exhibited the lowest water absorption and water vapor transmission rate among all tested formulations, outperforming both a commercial WPU and a wood wax oil benchmark. After 30 days under soil burial conditions, the coating lost approximately 80% of its initial mass. These results demonstrate that surface-engineered CNFs, when covalently integrated into a bio-based polyurethane network, can simultaneously reinforce, toughen, and hydrophobize the coating in a single processing step, providing a practical pathway toward sustainable, high-performance wood protection.
Abstract as supplied by the source. Full text may be restricted by the publisher.
Related publications
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 Sep 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k et al. · Central European Forestry Journal
Evaluation of Wood Processing in the Sawmilling Industry in Ekiti State, Nigeria
1 Jul 2025 · Ademola Ayodeji Omoyeni, Timileyin Samuel Oguntuase · International Journal of Advances in Engineering and Management
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 Mai 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro et al. · European Journal of Wood and Wood Products
Moisture-induced timber joining - Utilizing the hygroscopicity and shape-memory effect of wood resulting in dimensional change in a prefabricated wood-only, self-built, sawn timber system for affordable housing in Colombia
1 Mär 2024 · Max Salzberger, Juan Sebastian Cruz Rojas, Gilbert Koskamp · Research Square