Skip to content

Example data mode. The sample companies, offers and requests shown here are fictional (AI pictures) and are not counted in the figures below.

Acoustic and Mechanical Properties Sawmilling Technology Wood Modification Journal article

Elasto-mechanical properties of thermo-hygro-mechanical (THM) densified oil palm sawn timber

Nathan Koelli, Katja Fruehwald-Koenig

23 February 2024 · Wood Material Science and Engineering

Original publication Save

This publication is not marked as Open Access. The full text may require access through the publisher.

Summary

No reviewed summary yet. Read the abstract below or open the original publication.

Abstract

Oil palm wood is mainly low in density and since strength and stiffness correlate with density, this study aimed to enhance the properties of oil palm wood through thermo-hygro-mechanical (THM) densification. In contrast to other studies using small laboratory-sized specimens, this study examined the densification of oil palm boards in sawn timber dimensions of 2.0 m length. Modulus of elasticity (MOE) and modulus of rupture (MOR) in bending, shear strength and shear modulus parallel by two-plate shear test and Young’s modulus in the three main directions as well as shear modulus in the three planes by ultrasonic testing were determined at densified and undensified specimens. The bending properties were increased to considerably higher levels and a compression ratio of 60% showed higher MOE and MOR values than that of 40%; whereas for boards of the inner part of the trunk, a compression ratio of 60% showed better results than that of 75%. The shear properties were only slightly increased through densification. Densification can improve the properties of oil palm wood. However, the wide range of density and properties found in natural oil palm wood is also present in densified oil palm wood.

Abstract as supplied by the source. Full text may be restricted by the publisher.

Related publications