Lumber volume and value yields of balsam fir trees affected or killed by the spruce budworm in the northeastern boreal forest of Canada
Isabelle Duchesne, Carole Coursolle, Martin P. Girardin, Philippe Labrie, Vincent Seigner, Samuel Lapierre, Jean‐Michel Béland, Christian Hébert
18 July 2026 · Journal of Wood Science
Summary
No reviewed summary yet. Read the abstract below or open the original publication.
Abstract
Spruce budworm ( Choristoneura fumiferana (Clemens)) is the most destructive native forest defoliating insect in North America. Repeated defoliation causes tree mortality over large areas, reducing timber supply and wood quality. Since trees do not all die at the same time, the challenge for the wood transformation industry is to know if dead trees are worth salvaging. The objective of this study was to compare visual lumber grade yield and value extracted from live and dead balsam fir trees in three different states of degradation, based on Hunter classes 2 (live but declining trees), 3 (recently dead trees) and 4 (dead trees with bark peeling off). A total of 92 balsam fir trees were felled on five sites located in the Quebec North Shore region. The trees yielded 354 sawlogs, which were processed into 1044 pieces of lumber. All products were graded visually according to National Lumber Grades Authority (NLGA) standards. Results showed a major loss in wood quality following tree death, with a significant decrease in the volume proportion of high-quality Select Structural and No. 2 lumber grades (No. 2 and Better) from 51% in Hunter class 2 to 32% in class 3 and 13% in class 4, and a notable increase of low-quality No. 3 lumber from 25% in Hunter class 2, 36% in class 3, and 63% in class 4. Decay was the most important downgrading defect for the three Hunter classes, accounting for 22% of the lumber volume produced in class 2, 39% in class 3, and 69% in class 4. Lumber values per tree and per volume (m 3 ) significantly decreased from Hunter class 2 to 4. Compared to Hunter class 2, total lumber value dropped by 13% for class 3 and 34% for class 4 when grading lumber according to NLGA Para. 124 (Structural), and by 13% and 27% when grading the same lumber as Stud (NLGA Para. 121), indicating that the use of NLGA 121 helps reduce value losses in degraded dead trees. Based on these results, Hunter class 3 trees can still be harvested as their lumber value is close to that of live but declining class 2 trees, while trees of the most degraded class (4) may not be economically suitable to salvage, as wood degradation caused a major drop in lumber quality and value, especially in the largest diameter trees (29–33 cm).
Abstract as supplied by the source. Full text may be restricted by the publisher.
Related publications
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 Sep 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k et al. · Central European Forestry Journal
Evaluation of Wood Processing in the Sawmilling Industry in Ekiti State, Nigeria
1 Jul 2025 · Ademola Ayodeji Omoyeni, Timileyin Samuel Oguntuase · International Journal of Advances in Engineering and Management
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 May 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro et al. · European Journal of Wood and Wood Products
Moisture-induced timber joining - Utilizing the hygroscopicity and shape-memory effect of wood resulting in dimensional change in a prefabricated wood-only, self-built, sawn timber system for affordable housing in Colombia
1 Mar 2024 · Max Salzberger, Juan Sebastian Cruz Rojas, Gilbert Koskamp · Research Square