An investigation into the flexural properties of sawn timber and poles of South African grown Pinus maximinoi (H.E.Moore)
C. Brand Wessels, Christel Malek, Gary R. Hodge, Bruno Monteiro Balboni
29 febbraio 2024 · Southern Forests a Journal of Forest Science
This publication is not marked as Open Access. The full text may require access through the publisher.
Summary
No reviewed summary yet. Read the abstract below or open the original publication.
Abstract
Pinus maximinoi is a species that can potentially be deployed commercially to provide structural timber and poles for the South African market. The objective of this study was to investigate the flexural properties of sawn timber and poles of P. maximinoi from young plantations of the Southern Cape. A total of 60 trees and 150 logs for the sawmill study were obtained from two research trials on the Longmore estate in the Humansdorp area (13.7 years old), and on the Kruisfontein estate close to Knysna (9.0 years old). Some 74 poles from the same compartments were removed and tested in bending. The P. maximinoi sawn timber had excellent bending properties, superior to sawn timber from other South African Pinus species, tested at similar radial positions in previous studies. Analysis of variation showed that site, log height and board radial position had a significant influence on the modulus of elasticity (MOE) of sawn timber. Multiple regression analysis showed that board MOE can be predicted using a model including tree taper, time-of-flight measured with Treesonic and wood density (model R2 = 0.87). The P. maximinoi poles complied with the mean MOE national standard requirement SANS 457-2 of 9 000 MPa but not with the fifth percentile (bending strength) modulus of rupture (MOR) requirement of 34 MPa. This study and other research, however, showed that the national standard requirement for MOR of poles might be too high for current log resources in South Africa. The investigation into the bending and other properties of P. maximinoi sawn boards and poles showed extremely positive results. Based on this wood quality study of P. maximinoi, it is certainly a very promising species for deployment in the Southern Cape and potentially other regions in South Africa.
Abstract as supplied by the source. Full text may be restricted by the publisher.
Related publications
Predicting the mechanical properties of sawn timber: Basic non-destructive tools applicable to Norway spruce sawlogs
1 set 2026 · Rostislav Berezjuk, Matěj Šimek, Robert Mařı́k et al. · Central European Forestry Journal
Evaluation of Wood Processing in the Sawmilling Industry in Ekiti State, Nigeria
1 lug 2025 · Ademola Ayodeji Omoyeni, Timileyin Samuel Oguntuase · International Journal of Advances in Engineering and Management
Mechanical properties of sweet chestnut sawn wood and glulam performance
15 mag 2025 · Carlos Eduardo de Jesus Martins, Cláudio Ferreira, Sandra R. S. Monteiro et al. · European Journal of Wood and Wood Products
Moisture-induced timber joining - Utilizing the hygroscopicity and shape-memory effect of wood resulting in dimensional change in a prefabricated wood-only, self-built, sawn timber system for affordable housing in Colombia
1 mar 2024 · Max Salzberger, Juan Sebastian Cruz Rojas, Gilbert Koskamp · Research Square