Microwave-Assisted Heat Treatment for Sustainable Wood Modification: Enhanced Dimensional Stability and Selective Control of Volatile Organic Compound Emissions

Summary

No reviewed summary yet. Read the abstract below or open the original publication.

Abstract

Conventional air heat treatment (Air-HT) suffers from low energy efficiency and excessive volatile organic compound (VOC) emissions, limiting its sustainable implementation. This study evaluates microwave-assisted heat treatment (Mic-HT) of Afrormosia wood at 160, 180, and 200 °C as a sustainable alternative. The results showed that Mic-HT can reduce energy consumption by 10.26%–15.16% relative to Air-HT. At 180 °C, this process significantly enhanced mass loss (75.37% increase) and reduced equilibrium moisture content (4.06% decrease) compared to Air-HT. The treatment improved dimensional stability by 20%–42%, resulting in equivalent dimensional stabilization at lower temperatures (M180 ≈ A200). Mic-HT induces anisotropic color changes in transverse darkening at lower temperatures and intensified chromatic alterations at higher temperatures ( L *, a *, and b * values at 200 °C exceeding Air-HT by 7.71%, 21.94%, and 26.17%, respectively). VOC profiling revealed a fundamental transition from aldehyde-dominated to phenol-dominated emissions (>40% total VOCs), suppressing straight-chain aldehydes (>99%) and reducing VOC complexity by 60% at 180 °C. Under the combined action of thermal, nonthermal, and selective effects, Mic-HT enables energy-efficient wood modification with enhanced dimensional stability, anisotropic coloration, and selective emission control. This approach supports sustainable, emission-controllable wood processing aligned with carbon neutrality objectives.

Abstract as supplied by the source. Full text may be restricted by the publisher.